Free U.S. shipping on every order · 30-day free returns

How to Measure for Curtains: Length & Width Guide

How to Measure for Curtains: Length & Width Guide

Well-measured curtains can make windows look taller, rooms feel larger, and the whole space more finished. Poorly measured ones — too short, too narrow — do the opposite. This guide walks you through measuring width, choosing length, placing the rod, and doing the panel math.

The Width Rule: 1.5–2x Your Window

For curtains that look full rather than flat, the total width of your curtain panels (added together) should measure 1.5 to 2 times the width of your window frame.

  • 1.5x — a tailored, lightly gathered look; good for sheers and casual rooms.
  • 2x — a lush, full gather; best for bedrooms, formal living rooms, and heavier fabrics like velvet.

Example: for a 40-inch-wide window, plan 60–80 inches of total curtain width. Since most panels are sold 52 inches wide in sets of two (104 inches total), one set of two covers most standard windows nicely.

Length Options: Sill, Apron, Floor, or Puddle

Curtain length is measured from the top of the rod (or the hanging point) to where you want the hem to fall:

  • Sill length: hem ends at the windowsill — practical for kitchens and bathrooms, and above radiators.
  • Apron length: hem falls 4–6 inches below the sill — a classic casual look for kitchens and breakfast nooks.
  • Floor length: hem just kisses the floor (about ½ inch above) — the standard for living rooms and bedrooms; clean and timeless.
  • Puddle: hem extends 2–4 inches onto the floor — romantic and formal; best in low-traffic rooms since it collects dust.

For most living rooms and bedrooms, floor length is the safest choice. Common ready-made lengths are 63, 84, and 96 inches — measure your space first, then pick the closest standard length.

Rod Placement: Hang High and Wide

Where you mount the rod matters as much as the curtains themselves:

  1. Height: mount the rod 4–6 inches above the window frame — or halfway between the frame and the ceiling for maximum height illusion.
  2. Width: extend the rod 4–6 inches beyond the frame on each side so the curtains can stack off the glass and let in full light.
  3. Measure from the rod: once the rod is placed (or its planned position is marked), measure from the rod down to your target hem point — that's your curtain length.

Hanging curtains high and wide is the single easiest trick for making windows look bigger and ceilings feel taller.

Panel Math: Worked Examples

Example 1 — standard living room window (36 in wide, rod at 88 in high): total width needed = 54–72 in → one set of two 52-inch panels (104 in total) works. Length: rod at ~88 in minus a floor-kissing hem → 84-inch panels.

Example 2 — wide bedroom window (60 in wide): total width needed = 90–120 in → one set of two 52-inch panels gives 104 in, right in range. Length: 96-inch panels for a rod hung high.

Example 3 — small kitchen window (30 in wide): total width = 45–60 in → cafe curtains or a single pair of sheers. Length: measure to the sill or 4 inches below for a casual cafe look.

Hanging Styles

  • Rod pocket: the rod slides through a sewn pocket — casual, gathers naturally; best for light fabrics like our linen-look sheers.
  • Grommet: metal rings create clean, even folds — modern and easy to open and close; used on our blackout curtains.
  • Back tab: hidden tabs create soft, tailored pleats — elegant and formal; used on our velvet curtains.

Measuring for Special Windows

  • Bay windows: measure each section separately, or use one wide rod across the whole bay with enough panels to cover the total width. Flexible bay-window rods follow the angles.
  • Sliding glass doors: treat like an extra-wide window — mount the rod well above the door frame and extend it 8–12 inches beyond each side so panels stack clear of the door when open. Floor-length panels only.
  • Arched or unusually shaped windows: hang the rod at the point where the arch begins to straighten, or mount above the arch and let long panels frame the shape.
  • Two windows close together: treat them as one wide window with a single rod and shared panels — it looks more intentional and makes the wall feel wider.

Fabric Weight and Fullness

Heavier fabrics (velvet, thermal) gather into deeper folds and need the full 2x width multiplier to look right. Lightweight sheers can go up to 2.5–3x width for a billowy effect without looking bulky. When layering sheers behind heavier panels on a double rod, measure each layer independently using the same window width.

Quick Answers

How wide should curtains be? Total panel width of 1.5–2 times your window width gives a proper full look.

How long should curtains be? For living rooms and bedrooms, floor length (hem just touching the floor) is the classic choice; measure from your rod position down.

Now that you know your measurements, explore our Curtains & Drapes collection — sheers, blackouts, velvet, thermal, and cafe styles in ready-made sizes.